M Series Taper 10 to31 Deg

Head Diam. 3/32 : Length of Cut 5/16 : Shank Diameter 3/32" x 1-1/2"

Head Diam. 1/8 : Length of Cut 3/8 : Shank Diameter 1/8 X 1-1/2

Tapered 14 Degrees Included Angle

Head Diam. 1/8 : Length of Cut 7/16 : Shank Diameter 1/8 X 1-1/2

Please note: Purchase 100 pieces or more and pay only $3.21 each until supplies last..

Head Diam. 1/8 : Length of Cut 5/8 : Shank Diameter 1/8 X 1-1/2

7 Degree Taper

Head Diam. 3/16 : Length of Cut 1/2 : Shank Diameter 1/8 X 1-1/2

16 Deg Included angle..

Head Diam. 3/16 : Length of Cut 5/8 : Shank Diameter 3/16 X 2

12 Degree Included Angle

Head Diam. 1/4 : Length of Cut 1/2 : Shank Diameter 1/8 X 1-1/2

22 Degree Included Angle

Head Diam. 1/4 : Length of Cut 1/2 : Shank Diameter 3/16 X 2

22 Degree Included Angle

Head Diam. 1/4 : Length of Cut 1/2 : Shank Diameter 1/4 X 2

Taper Shape M Burr 14 Degree Included Angle.Also available in 6" Length see option when ordering..

Head Diam. 1/4 : Length of Cut 3/4 : Shank Diameter 1/4 X 2

Taper Shape M Burr 14 Deg Angle

Also available in 6" Length see option when ordering..

Also available in Aluma-Cut in all lengths.

Head Diam. 1/4 : Length of Cut 1 : Shank Diameter 1/4 X 2

Taper Shape M Burr 10 Deg Angle

Also available in 6" Length see option when ordering..

Also available in Aluma-Cut

Head Diam. 3/8 : Length of Cut 5/8 : Shank Diameter 1/4 X 2

Taper Shape M Burr 28 Deg Angle

Also available in 6" Length see option when ordering..